Important Things to Know Before Buying ESE Lightning Arrester
Are you seeking an ESE Lightning Arrester manufacturer in India, comprehensive information on advanced ESE Lightning Arrester, or want to install ESE Lightning Arrester for building protection? You’ve come to the correct place. We at Ennob are one of the most significant ESE Lightning Arrester manufacturers in India that preserve the building structure from the natural calamities, such as lightning, striking, etc. The installation of a Lightning Arrester depends on the coverage area the user wishes to cover. To guard against Lightning, choosing the proper configuration makes more sense. Lightning Arrester may allow you to cover more regions than a standard lightning arrester.
What is an ESE Lightning Arrester?
An Early Streamer Emission air terminal, commonly known as an ESE or an ionizing lightning rod, is an innovative external lightning protection mechanism. This ESE air terminal is sometimes referred to as an active lightning rod.
Importance of ESE lightning arrester
Lightning Arrester protects himself from lightning. When lightning strikes a structure directly, it causes a major tragedy in the surrounding region. Direct lightning to the structure might result in severe destruction, causing damage to your equipment and perhaps death. Installing a lightning-arrester will reduce the danger of harm.
Lightning Arrester acts as a shield to the specific locations that have been covered by Lightning Arrester. There is some technical computation of the safety coverage area.
How does ESE lightning arrester works?
A standard lightning arrester intercepts lightning and directs the high- voltage electricity to the earth through an interception rod. Simultaneously, the lightning arrester captures the high voltage current, transmits the charge down a good quality down conductor, and discharges the high voltage current through a good conductive earthing system.
What are the Important Factors to Consider before Buying ESE Lightning Arrester?
A standard lightning arrester intercepts lightning and directs the high- voltage electricity to the earth through an interception rod. Simultaneously, the lightning arrester captures the high voltage current, transmits the charge down a good quality down conductor, and discharges the high voltage current through a good conductive earthing system.
What are the Important Factors to Consider before Buying ESE Lightning Arrester?
1. Quality of the Arrester
The concept of quality varies depending on the sort of arrester in question. For example, a distribution arrester’s capacity to withdraw from the system if it becomes overwhelmed is a key feature. This disconnecting capability, however, is not even considered for a station arrester. However, for a transmission line arrester, the ability to disconnect is high on the list of quality qualities to consider.
2. Whether the ESE Lightning Protection System is Original or Not?
Always request the Custom Duty Receipt, Bill of Lading (Airway Bill), and Certificate of Origin before purchasing ESE Lightning Arresters. Nine out of ten providers will not supply you with these documents
3. Is the ESE Lightning Arrester tested for 100kA in 10/350ms waveform?
91% of ESE Lightning Arrester manufacturers do not have their products tested in accordance with NFC 17-102 requirements, although claiming to conform to NFC specifications for ESE Lightning Arrester.
4. Can we test the ESE Lightning Arrester?
The ESE Lightning Protection System has a warranty of 10-30 years, yet over 87% of the ESE Lightning Arresters are not tested. This means you can’t test if the ESE Lightning Protection System is working or not. Is it capable of protecting you? Some other major factors we should consider before we buy Quality ESE Lightning Arrester are listed below:
- ✓ Strong Materials with Proven Record
- ✓ Exceptional Protection Levels
- ✓ High Moisture and Water Resistance
- ✓ Proven Failure Mode
